T55 x 50mm Hobson IMPAX Torx Power Driver Bit

Description

Product Introduction
This T55 x 50mm Hobson IMPAX Torx Power Driver Bit produced by VANGUARD INDUSTRIAL is an industrial grade high-strength plum blossom impact batch head:
Core parameters: The total length is 50mm, compatible with T55 specification Torx fasteners, and the tail is a standard 1/4 inch hexagonal handle, which can directly adapt to the majority of electric screwdrivers, impact screwdrivers, and pneumatic wrench head clamps.
Structural characteristics: The overall structure is forged from high-strength alloy steel and undergoes special quenching and hardening treatment, resulting in high hardness and strong impact toughness. The T55 plum blossom tooth shape accuracy of the head is high, and the meshing degree with the corresponding screw is excellent. When applying force, the force is evenly distributed, and there will be no problems of slipping, tooth breakage, or tooth slippage; The yellow marking ring on the shaft can quickly identify the specifications of the batch head, and can be quickly located and used in the tool pile. It is very suitable for high-frequency industrial assembly and equipment maintenance scenarios. Compared with ordinary batch heads, its impact resistance life and torque transmission efficiency have been greatly improved.
🛠️ Usage
Preparation in advance
Confirm that the fasteners to be disassembled are standard T55 internal plum blossom screws. Clean the dust and rust in the screw groove in advance to ensure that the mating surface is clean and free of debris. Check that the tooth shape of the head of the batch is not broken or damaged, and that the rod body is not cracked or deformed.
Installation operation
Fully insert the hexagonal handle of the screwdriver head into the chuck of the electric/pneumatic tool, confirm that the chuck is locked in place, fully embed the screwdriver head into the plum blossom groove of the T55 screw, keep the screwdriver head and screw axis completely aligned, and start the tool to apply even force for tightening operation, avoiding forced force at an inclined angle to prevent the screwdriver head tooth shape from collapsing or the screw groove from being damaged.
Precautions
This batch head is specifically designed for impact grade and performs best when compatible with impact grade electric tools. Do not apply loads far exceeding its rated torque beyond the specifications to avoid batch head breakage; After use, it is recommended to store it in a dry tool box to avoid long-term moisture damage that may cause surface rust and affect its service life.