3M Class 1 Vehicle Zebra Rear Marker (Right Side) 600mm x 150mm Reflective Sign – Long Life Sticker

Description

3M Level 1 Right Zebra Reflective Tail Label
📋 Basic Information
Product Name: 3M Class 1 Vehicle Zebra Rear Marker (Right Side)
Specification size: 600mm x 150mm
Core Material: 3M National Standard Grade 1 High Brightness Microprism Lattice Reflective Film
Appearance features: The design features a diagonal zebra pattern with yellow and red stripes, with fixed installation holes reserved at the four corners. It is a long-life reflective logo designed specifically for the right side of the tail.
🔍 Product Introduction
This is a compliant and long-lasting safety warning sticker designed specifically for large trucks and construction vehicles. It relies on 3M microprism reflective technology and densely arranges over 930 microcrystalline cubic corners per square centimeter of material, achieving efficient reverse reflection effect without the need for a metal reflective layer. In low visibility environments such as night, rain, and haze, when illuminated by other vehicles’ lights, it can highlight and reflect from a distance, clearly outlining the contours of the rear of the vehicle, greatly improving the visibility of large vehicles, and effectively reducing the probability of rear end collisions and scratches. The product has excellent UV resistance, outdoor aging resistance, and sand and gravel impact resistance. Under normal use conditions, it can maintain stable reflective performance for a long time and comply with domestic and international regulations for motor vehicle safety pasting.
🛠️ Usage
Environmental preparation: Select a scenario with an ambient temperature between 10 ℃ and 38 ℃ for installation. When the temperature is too low, the surface of the vehicle to be installed can be heated in advance to ensure the bonding effect.
Surface pretreatment: Clean the installation position on the right rear of the vehicle, completely remove oil, dust, and water stains, wipe with isopropanol quick drying solvent, and dry with a dry cloth before the solvent completely evaporates to ensure a dry and smooth surface.
Installation and fixation: Tear off the adhesive protective layer on the back of the sticker, align it with the designated position, and lightly press to preliminarily fix it. Use a scraper to repeatedly press the sticker as a whole, eliminate internal bubbles, and make the sticker fully adhere to the vehicle body; Alternatively, the reserved holes at the four corners can be reinforced with rivets to adapt to long-term outdoor use scenarios of metal car bodies.
Daily maintenance: Regularly check the condition of the stickers, clean surface stains in a timely manner, and replace them in a timely manner to ensure that the warning effect is always effective in case of warping, large-scale stains and detachment.