3M Class 1 Reflective Sticker Zebra Sign 400mm x100mm 41B

Description

3M first grade zebra reflective warning sticker 41b
📋 Basic Information
Product Name: 3M Class 1 Reflective Sticker Zebra Sign 41b
Specification size: 400mm x 100mm
Core Material: 3M National Standard Grade 1 High Brightness Lattice Reflective Film
Appearance features: Yellow and red diagonal zebra pattern design, reserved fixed installation holes at the four corners, and diagonal direction opposite to the same series of 41A models.
🔍 Product Introduction
This is a compliance safety warning sticker designed specifically for large trucks and construction vehicles. It adopts 3M professional first level reflective technology, and the micro prism lattice structure on the surface can achieve strong reverse reflection effect. In low visibility environments such as night, rain, haze, etc., it can be illuminated by other vehicles’ lights for a long distance and highlight the reflection, clearly transmitting the body contour warning signal, greatly improving the visibility of the rear and side of the vehicle, and effectively reducing the probability of large vehicle rear end collisions and scratches. The product has the characteristics of waterproofing, UV resistance, and outdoor aging resistance. It can maintain stable reflective performance even under long-term exposure to wind and sun, and complies with domestic and international regulations for motor vehicle safety pasting.
🛠️ Usage
Environmental preparation: Choose a scene with an ambient temperature between 10 ℃ and 38 ℃ for pasting. When the temperature is too low, heat the pasting surface in advance to ensure the adhesive bonding effect.
Surface pretreatment: Clean the surface of the vehicle to be pasted, completely remove oil, dust, and water stains, wipe it with isopropanol quick drying solvent, and dry it with a dry cloth before the solvent completely evaporates to ensure that the surface is dry and flat.
Adhesive fixation: Tear off the adhesive protective layer on the back of the sticker, align it with the designated position, and lightly press to preliminarily fix it. Use a scraper to repeatedly press the sticker as a whole, eliminate internal bubbles, and make the sticker fully adhere to the vehicle body; Alternatively, the reserved holes at the four corners can be reinforced with rivets to adapt to non adhesive metal installation scenarios.
Daily maintenance: Regularly check the condition of the stickers, clean surface stains in a timely manner, and replace them in a timely manner to ensure that the warning effect is always effective in case of warping, large-scale stains and detachment.