Description
Product Introduction
This 4.8 × 16mm aluminum steel white multi grip type pop core rivet produced by VANGUARD INDUSTRIAL is a highly adaptable universal single-sided riveting fastener:
Core parameters: The nominal diameter of the rivet is 4.8mm, the length of the rivet body is 16mm, the rivet body is made of lightweight aluminum alloy material, the nail core is made of high-strength steel, and the head is treated with white paint coating, which balances rust prevention performance and decorative appearance.
Structural advantages: As a multi grip (wide riveting range) designed pop rivet, its effective riveting thickness coverage range is much larger than that of ordinary rivets of the same specification, which can adapt to workpieces with different stacking thicknesses without the need to frequently replace rivets of different lengths, greatly reducing stocking costs; The white coating can directly adapt to installation scenarios with uniform appearance color requirements, without the need for additional surface spraying treatment.
Applicable scenarios: Riveting operations can be completed from only one side of the workpiece, widely used in decoration, identification and sign fixing, home appliance shell assembly, hardware shelf splicing and other scenarios. It is particularly suitable for installation needs with small tolerances in workpiece thickness and the need to balance fastening strength and appearance cleanliness. It is a cost-effective fastening solution that balances practicality and aesthetics.
🛠️ Usage
preliminary preparation
Drill a fitting through-hole with a diameter of approximately 4.9-5.0mm on the workpiece to be riveted based on the nominal diameter of the rivet of 4.8mm. Clean the burrs and residual debris in the hole, tightly fit and fix the workpiece to be connected, eliminate excess gaps between the workpieces, and confirm that the total stack thickness of the workpiece is within the effective riveting range of this rivet.
Clamping and debugging
Choose a riveting gun that is compatible with 4.8mm rivets, replace the corresponding nozzle size, fully insert the rivet core into the nozzle of the riveting gun, and then pass the rivet body through the workpiece through-hole, keeping the rivet perpendicular to the workpiece surface, and ensuring that the white rivet head is flat and fits the workpiece surface.
Riveting operation
Start the rivet gun smoothly and pull the nail core. The rivet body gradually expands under tension, forming a full locking head on the back of the workpiece; When the tension reaches the set threshold, the nail core will break neatly at the preset neck position, completing the riveting operation.
Closing inspection
After riveting is completed, check whether the white head of the rivet is flat, free of bumps, and fully adheres to the surface of the workpiece. Confirm that the back of the rivet head is fully formed without looseness, and gently shake the workpiece to confirm that the connection is firm and there is no displacement; When storing rivets for a long time, take moisture-proof measures to avoid rusting of the aluminum alloy rivet body and steel nail core, which may affect the riveting performance.
Reviews
There are no reviews yet.