Reflective Sticker- 300*300mm Left

Description

The overall material is made of lattice high brightness reflective material, with a striking bright yellow base and iconic red oblique cut color blocks. The honeycomb shaped reflective texture on the surface can reflect long-distance incident light back to the light source in low visibility environments such as night, rain, and fog, greatly improving the long-distance recognition of the vehicle’s side.
As a matching left side warning sign for the same series of “No Overtaking and Turning Vehicles” warning signs, it can be used in conjunction with the corresponding right side warning sign to form a complete system of large vehicle side warning signs. It is specifically used to remind surrounding vehicles to pay attention to the risk of internal wheel difference when large vehicles turn, and to avoid accidents caused by forced overtaking during the turning process of large vehicles.
Equipped with strong adhesive and waterproof backing, it has excellent weather resistance and corrosion resistance. Even when used outdoors in complex road conditions for a long time, there will be no problem of logo fading or adhesive peeling off. It is suitable for installation scenarios on the left side of various trucks and trailers.
🛠️ Usage
Preprocessing: After selecting the corresponding installation position on the left side of the vehicle, use a cleaning agent to completely wipe off the oil and dust on the surface of the vehicle body in that area, wait for the surface to completely dry, and avoid residual impurities affecting the adhesion firmness.
Positioning and pasting: After aligning with the preset position, slowly tear off the adhesive backing paper of the reflective sticker, gradually press and paste it from the center of the sticker to the surrounding areas, and use a scraper or hard card to gently scrape off any remaining bubbles under the sticker, ensuring that the sticker is completely tightly attached to the car body without wrinkles or hollows.
Compliance verification: Confirm that the installation position of the sticker will not obstruct the signal devices such as turn signals and side marker lights of the vehicle, and that the sticker is not less than 380mm above the ground, in compliance with the relevant specifications for road vehicle signage installation.
Daily maintenance: Regularly clean the stains on the surface of the stickers, check if there are any curled edges on the edges of the stickers, and replace them in a timely manner if the reflective layer is worn or the markings are blurred, always ensuring the reflective and visible effect of the warning signs.